Two-component polyurethane varnish, self sealer for parquet. High performance, for professional use. Available in different gloss levels.
Catalysis ratio: 1:1
| Code 4115-2K-XX + 4115-K | 500ml + 500ml |
| Code 4100-2K-XX + 4107-K | 1Lt + 1Lt |
| Code 4101-2K-XX + 4107.2,5-K | 2,5Lt + 2,5Lt |
| Code 4102-2K-XX + 4108-K | 5Lt + 5Lt |
It is a one-component polyurethane-based varnish ready for use, special as a primer-finish treatment for any wooden flooring, easy and fast. Fast drying, it is characterized by excellent workability even in industrial applications. To increase the covering of the covering, it is possible, even if not strictly necessary, to apply the Borma Parkettlack 2k primer as a preliminary layer.
Self sealing-transparent finish based on vegetable oils, resins and waxes. Characterized by a medium drying time and high viscosity, it allows effective and lasting protection against trampling and staining. It combines hardness and resistance to a natural effect. Suitable for parquet and all interior surfaces. Available in different gloss levels, it enhances the natural beauty of wood.
Recommended application in two or three coats, with a roller, brush, spray or rag, on rough wood or in any case free of old paint residues. A background coloring can be obtained with Grundieroil Coloroil.
Cleaning with neutral detergents such as Parkettreiniger, maintenance with wax, also as kit: Kit 1 o Kit 2.
Treatment based on natural oils, reinforced with high quality resins and waxes, for finishing wooden floors, in one or two coats. Formulation with medium drying time and high viscosity. Returns its original beauty to the wood with a pleasant and natural finish. Use: Interior
Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.
